New Arrivals

Spline Size: 1.375" - 16, Center To End Of Spline: 5.812", Bearing Cap Diameter: 1.188", Length Of H..yy

Image Shown Is S-11590 Wheel Cylinder..yy

Replacement for Bendix DC-4™, Port: 3/8 x 3/8 x 3/8 x 3/8 IMAGE SHOWN IS S-16921 Double Check Valve..yy

Works w/ SAE J844 Nylon Tubing, Meets DOT FMVSS71.106 & SAE J1131, J2494 Standards, -45º to 140º Tem..yy

Polished Aluminum , Works W/ Long Hood (127")..yy

Spline Size: 1.562" - 16 , Center To End Of Spline: 6.812" , Bearing Cap Diameter: 1.375" , Length O..yy

..yy

Delivery: (4) 3/8"Reservoir: 3/4"Control: 3/8"Crack Pressure: 4.0 PSILOV-4REPLACEMENT FOR SEALCO®..yy

Works w/ SAE J844 Nylon Tubing, Meets DOT FMVSS71.106 & SAE J1131, J2494 Standards, -45º to 140º Tem..yy

Polished Aluminum, Works W/ Long Hood (127")..yy

Spline Size: 1.562" - 16, Center To End Of Spline: 9.500", Bearing Cap Diameter: 1.375", Length Of H..yy

Military M37 3/4 Ton Models..yy

Delivery: (2) 3/8"Reservoir: 1/2"Control:3/8"Crack Pressure: 0 PSICore Group: 210LOV-C, Low Opening ..yy

Works w/ SAE J844 Nylon Tubing, Meets DOT FMVSS71.106 & SAE J1131, J2494 Standards, -45º to 140º Tem..yy

Thickness: 7/16", 1/2" Bolt..yy

..yy

Haldex StyleType: Drive AxleUnhanded Design, Drilled Worm WheelFactory Lubricated & Sealed, Heav..yy

REPLACEMENT FOR SEALCO®Ports: 1/2 NPT (A) & 1/2 NPT (B)Crack Pressure: 4 PSIPPV Closing Pressure..yy

Works w/ SAE J844 Nylon Tubing, Meets DOT FMVSS71.106 & SAE J1131, J2494 Standards, -45º to 140º Tem..yy

I.D.: 0.5", Height: 0.625", Length: 2.23", Width: 1.95", Sm O.D.: 1.13"..yy

Caterpillar D6R2 & LGP Engine Models..yy

Bendix StyleClearance SensingQuick-Connect ClevisCollar Lock Clevis5.5 & 6 ArmsComplete W/ Strai..yy

70 PSI Closing Pressure ValvePorts: 1/4"-18 NPT..yy

..yy

Spline Size: 1.500" - 16, Center To End Of Spline: 5.250", Bearing Cap Diameter: 1.188", Length Of H..yy